Initial checkin

logseq/bak/pages/G8B/2025-05-01T18_48_55.973Z.Desktop.md

@@ -0,0 +1,92 @@
+G8B – Frequency changing; bandwidths of various modes; deviation; intermodulation
+
+- [[G8B01]] (B)
+Which mixer input is varied or tuned to convert signals of different frequencies to an intermediate frequency (IF)?
+	- A. Image frequency
+	- B. Local oscillator
+	- C. RF input
+	- D. Beat frequency oscillator
+--
+- [[G8B02]] (B)
+What is the term for interference from a signal at twice the IF frequency from the desired signal?
+	- A. Quadrature response
+	- B. Image response
+	- C. Mixer interference
+	- D. Intermediate interference
+--
+- [[G8B03]] (A)
+What is another term for the mixing of two RF signals?
+	- A. Heterodyning
+	- B. Synthesizing
+	- C. Frequency inversion
+	- D. Phase inversion
+--
+- [[G8B04]] (D)
+What is the stage in a VHF FM transmitter that generates a harmonic of a lower frequency signal to reach the desired operating frequency?
+	- A. Mixer
+	- B. Reactance modulator
+	- C. Balanced converter
+	- D. Multiplier
+--
+- [[G8B05]] (C)
+Which intermodulation products are closest to the original signal frequencies?
+	- A. Second harmonics
+	- B. Even-order
+	- C. Odd-order
+	- D. Intercept point
+--
+- [[G8B06]] (D)
+What is the total bandwidth of an FM phone transmission having 5 kHz deviation and 3 kHz modulating frequency?
+	- A. 3 kHz
+	- B. 5 kHz
+	- C. 8 kHz
+	- D. 16 kHz
+--
+- [[G8B07]] (B)
+What is the frequency deviation for a 12.21 MHz reactance modulated oscillator in a 5 kHz deviation, 146.52 MHz FM phone transmitter?
+	- A. 101.75 Hz
+	- B. 416.7 Hz
+	- C. 5 kHz
+	- D. 60 kHz
+--
+- [[G8B08]] (B)
+Why is it important to know the duty cycle of the mode you are using when transmitting?
+	- A. To aid in tuning your transmitter
+	- B. Some modes have high duty cycles that could exceed the transmitter’s average power rating
+	- C. To allow time for the other station to break in during a transmission
+	- D. To prevent overmodulation
+--
+- [[G8B09]] (D)
+Why is it good to match receiver bandwidth to the bandwidth of the operating mode?
+	- A. It is required by FCC rules
+	- B. It minimizes power consumption in the receiver
+	- C. It improves impedance matching of the antenna
+	- D. It results in the best signal-to-noise ratio
+--
+- [[G8B10]] (B)
+What is the relationship between transmitted symbol rate and bandwidth?
+	- A. Symbol rate and bandwidth are not related
+	- B. Higher symbol rates require wider bandwidth
+	- C. Lower symbol rates require wider bandwidth
+	- D. Bandwidth is half the symbol rate
+--
+- [[G8B11]] (C)
+What combination of a mixer’s Local Oscillator (LO) and RF input frequencies is found in the output?
+	- A. The ratio
+	- B. The average
+	- C. The sum and difference
+	- D. The arithmetic product
+--
+- [[G8B12]] (A)
+What process combines two signals in a non-linear circuit to produce unwanted spurious outputs?
+	- A. Intermodulation
+	- B. Heterodyning
+	- C. Detection
+	- D. Rolloff
+--
+- [[G8B13]] (C)
+Which of the following is an odd-order intermodulation product of frequencies F1 and F2?
+	- A. 5F1-3F2
+	- B. 3F1-F2
+	- C. 2F1-F2
+	- D. All these choices are correct