chris/General-Study
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases 1 Activity

Initial checkin

Browse Source
This commit is contained in:
Chris
2025-05-01 13:59:40 -05:00
commit 25913552a2
93 changed files with 7311 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

85
logseq/bak/pages/G6A/2025-05-01T18_48_55.969Z.Desktop.md Normal file
View File

@ -0,0 +1,85 @@
G6A – Resistors; capacitors; inductors; rectifiers; solid-state diodes and transistors; vacuum tubes; batteries
- [[G6A01]] (C)
What is the minimum allowable discharge voltage for maximum life of a standard 12-volt lead-acid battery?
- A. 6 volts
- B. 8.5 volts
- C. 10.5 volts
- D. 12 volts
--
- [[G6A02]] (B)
What is an advantage of batteries with low internal resistance?
- A. Long life
- B. High discharge current
- C. High voltage
- D. Rapid recharge
--
- [[G6A03]] (B)
What is the approximate forward threshold voltage of a germanium diode?
- A. 0.1 volt
- B. 0.3 volts
- C. 0.7 volts
- D. 1.0 volts
--
- [[G6A04]] (C)
Which of the following is characteristic of an electrolytic capacitor?
- A. Tight tolerance
- B. Much less leakage than any other type
- C. High capacitance for a given volume
- D. Inexpensive RF capacitor
--
- [[G6A05]] (C)
What is the approximate forward threshold voltage of a silicon junction diode?
- A. 0.1 volt
- B. 0.3 volts
- C. 0.7 volts
- D. 1.0 volts
--
- [[G6A06]] (B)
Why should wire-wound resistors not be used in RF circuits?
- A. The resistor’s tolerance value would not be adequate
- B. The resistor’s inductance could make circuit performance unpredictable
- C. The resistor could overheat
- D. The resistor’s internal capacitance would detune the circuit
--
- [[G6A07]] (A)
What are the operating points for a bipolar transistor used as a switch?
- A. Saturation and cutoff
- B. The active region (between cutoff and saturation)
- C. Peak and valley current points
- D. Enhancement and depletion modes
--
- [[G6A08]] (D)
Which of the following is characteristic of low voltage ceramic capacitors?
- A. Tight tolerance
- B. High stability
- C. High capacitance for given volume
- D. Comparatively low cost
--
- [[G6A09]] (B)
Which of the following describes MOSFET construction?
- A. The gate is formed by a back-biased junction
- B. The gate is separated from the channel by a thin insulating layer
- C. The source is separated from the drain by a thin insulating layer
- D. The source is formed by depositing metal on silicon
--
- [[G6A10]] (A)
Which element of a vacuum tube regulates the flow of electrons between cathode and plate?
- A. Control grid
- B. Suppressor grid
- C. Screen grid
- D. Trigger electrode
--
- [[G6A11]] (C)
What happens when an inductor is operated above its self-resonant frequency?
- A. Its reactance increases
- B. Harmonics are generated
- C. It becomes capacitive
- D. Catastrophic failure is likely
--
- [[G6A12]] (A)
What is the primary purpose of a screen grid in a vacuum tube?
- A. To reduce grid-to-plate capacitance
- B. To increase efficiency
- C. To increase the control grid resistance
- D. To decrease plate resistance

74
logseq/bak/pages/G6A/2025-05-01T18_49_27.571Z.Desktop.md Normal file
View File

@ -0,0 +1,74 @@
G6A – Resistors; capacitors; inductors; rectifiers; solid-state diodes and transistors; vacuum tubes; batteries
- [[G6A01]] (C)
What is the minimum allowable discharge voltage for maximum life of a standard 12-volt lead-acid battery?
- A. 6 volts
- B. 8.5 volts
- C. 10.5 volts
- D. 12 volts
- [[G6A02]] (B)
What is an advantage of batteries with low internal resistance?
- A. Long life
- B. High discharge current
- C. High voltage
- D. Rapid recharge
- [[G6A03]] (B)
What is the approximate forward threshold voltage of a germanium diode?
- A. 0.1 volt
- B. 0.3 volts
- C. 0.7 volts
- D. 1.0 volts
- [[G6A04]] (C)
Which of the following is characteristic of an electrolytic capacitor?
- A. Tight tolerance
- B. Much less leakage than any other type
- C. High capacitance for a given volume
- D. Inexpensive RF capacitor
- [[G6A05]] (C)
What is the approximate forward threshold voltage of a silicon junction diode?
- A. 0.1 volt
- B. 0.3 volts
- C. 0.7 volts
- D. 1.0 volts
- [[G6A06]] (B)
Why should wire-wound resistors not be used in RF circuits?
- A. The resistor’s tolerance value would not be adequate
- B. The resistor’s inductance could make circuit performance unpredictable
- C. The resistor could overheat
- D. The resistor’s internal capacitance would detune the circuit
- [[G6A07]] (A)
What are the operating points for a bipolar transistor used as a switch?
- A. Saturation and cutoff
- B. The active region (between cutoff and saturation)
- C. Peak and valley current points
- D. Enhancement and depletion modes
- [[G6A08]] (D)
Which of the following is characteristic of low voltage ceramic capacitors?
- A. Tight tolerance
- B. High stability
- C. High capacitance for given volume
- D. Comparatively low cost
- [[G6A09]] (B)
Which of the following describes MOSFET construction?
- A. The gate is formed by a back-biased junction
- B. The gate is separated from the channel by a thin insulating layer
- C. The source is separated from the drain by a thin insulating layer
- D. The source is formed by depositing metal on silicon
- [[G6A10]] (A)
Which element of a vacuum tube regulates the flow of electrons between cathode and plate?
- A. Control grid
- B. Suppressor grid
- C. Screen grid
- D. Trigger electrode
- [[G6A11]] (C)
What happens when an inductor is operated above its self-resonant frequency?
- A. Its reactance increases
- B. Harmonics are generated
- C. It becomes capacitive
- D. Catastrophic failure is likely
- [[G6A12]] (A)
What is the primary purpose of a screen grid in a vacuum tube?
- A. To reduce grid-to-plate capacitance
- B. To increase efficiency
- C. To increase the control grid resistance
- D. To decrease plate resistance