3.3 KiB
T2A - Station operation: choosing an operating frequency, calling another station, test transmissions; Band plans: calling frequencies, repeater offsets
-
T2A01 (B) What is a common repeater frequency offset in the 2 meter band? #card
- A. Plus or minus 5 MHz
- B. Plus or minus 600 kHz
- C. Plus or minus 500 kHz
- D. Plus or minus 1 MHz
-
T2A02 (A) What is the national calling frequency for FM simplex operations in the 2 meter band? #card
- A. 146.520 MHz
- B. 145.000 MHz
- C. 432.100 MHz
- D. 446.000 MHz
-
T2A03 (A) What is a common repeater frequency offset in the 70 cm band? #card
- A. Plus or minus 5 MHz
- B. Plus or minus 600 kHz
- C. Plus or minus 500 kHz
- D. Plus or minus 1 MHz
-
T2A04 (B) What is an appropriate way to call another station on a repeater if you know the other station's call sign? #card
- A. Say "break, break," then say the station's call sign
- B. Say the station's call sign, then identify with your call sign
- C. Say "CQ" three times, then the other station's call sign
- D. Wait for the station to call CQ, then answer
-
T2A05 (C) How should you respond to a station calling CQ? #card
- A. Transmit "CQ" followed by the other station’s call sign
- B. Transmit your call sign followed by the other station’s call sign
- C. Transmit the other station’s call sign followed by your call sign
- D. Transmit a signal report followed by your call sign
-
T2A06 (A) Which of the following is required when making on-the-air test transmissions? #card
- A. Identify the transmitting station
- B. Conduct tests only between 10 p.m. and 6 a.m. local time
- C. Notify the FCC of the transmissions
- D. All these choices are correct
-
T2A07 (A) What is meant by "repeater offset”? #card
- A. The difference between a repeater’s transmit and receive frequencies
- B. The repeater has a time delay to prevent interference
- C. The repeater station identification is done on a separate frequency
- D. The number of simultaneous transmit frequencies used by a repeater
-
T2A08 (D) What is the meaning of the procedural signal “CQ”? #card
- A. Call on the quarter hour
- B. Test transmission, no reply expected
- C. Only the called station should transmit
- D. Calling any station
-
T2A09 (B) Which of the following indicates that a station is listening on a repeater and looking for a contact? #card
- A. “CQ CQ” followed by the repeater’s call sign
- B. The station’s call sign followed by the word “monitoring”
- C. The repeater call sign followed by the station’s call sign
- D. “QSY” followed by your call sign
-
T2A10 (A) What is a band plan, beyond the privileges established by the FCC? #card
- A. A voluntary guideline for using different modes or activities within an amateur band
- B. A list of operating schedules
- C. A list of available net frequencies
- D. A plan devised by a club to indicate frequency band usage
-
T2A11 (C) What term describes an amateur station that is transmitting and receiving on the same frequency? #card
- A. Full duplex
- B. Diplex
- C. Simplex
- D. Multiplex
-
T2A12 (D) What should you do before calling CQ?
- A. Listen first to be sure that no one else is using the frequency
- B. Ask if the frequency is in use
- C. Make sure you are authorized to use that frequency
- D. All these choices are correct