T2A - Station operation: choosing an operating frequency, calling another station, test transmissions; Band plans: calling frequencies, repeater offsets 

- [[T2A01]] (B)
What is a common repeater frequency offset in the 2 meter band? #card
	- A. Plus or minus 5 MHz
	- B. Plus or minus 600 kHz
	- C. Plus or minus 500 kHz
	- D. Plus or minus 1 MHz
--
- [[T2A02]] (A)
What is the national calling frequency for FM simplex operations in the 2 meter band? #card
	- A. 146.520 MHz
	- B. 145.000 MHz
	- C. 432.100 MHz
	- D. 446.000 MHz
--
- [[T2A03]] (A)
What is a common repeater frequency offset in the 70 cm band? #card
	- A. Plus or minus 5 MHz
	- B. Plus or minus 600 kHz
	- C. Plus or minus 500 kHz
	- D. Plus or minus 1 MHz
--
- [[T2A04]] (B)
What is an appropriate way to call another station on a repeater if you know the other station's call sign? #card
	- A. Say "break, break," then say the station's call sign
	- B. Say the station's call sign, then identify with your call sign
	- C. Say "CQ" three times, then the other station's call sign
	- D. Wait for the station to call CQ, then answer
--
- [[T2A05]] (C)
How should you respond to a station calling CQ? #card
	- A. Transmit "CQ" followed by the other station’s call sign
	- B. Transmit your call sign followed by the other station’s call sign
	- C. Transmit the other station’s call sign followed by your call sign
	- D. Transmit a signal report followed by your call sign
--
- [[T2A06]] (A)
Which of the following is required when making on-the-air test transmissions? #card
	- A. Identify the transmitting station
	- B. Conduct tests only between 10 p.m. and 6 a.m. local time
	- C. Notify the FCC of the transmissions
	- D. All these choices are correct
--
- [[T2A07]] (A)
What is meant by "repeater offset”? #card
	- A. The difference between a repeater’s transmit and receive frequencies
	- B. The repeater has a time delay to prevent interference
	- C. The repeater station identification is done on a separate frequency
	- D. The number of simultaneous transmit frequencies used by a repeater
--
- [[T2A08]] (D)
What is the meaning of the procedural signal “CQ”? #card
	- A. Call on the quarter hour
	- B. Test transmission, no reply expected
	- C. Only the called station should transmit
	- D. Calling any station
--
- [[T2A09]] (B)
Which of the following indicates that a station is listening on a repeater and looking for a contact? #card
	- A. “CQ CQ” followed by the repeater’s call sign
	- B. The station’s call sign followed by the word “monitoring”
	- C. The repeater call sign followed by the station’s call sign
	- D. “QSY” followed by your call sign
--
- [[T2A10]] (A)
What is a band plan, beyond the privileges established by the FCC? #card
	- A. A voluntary guideline for using different modes or activities within an amateur band
	- B. A list of operating schedules
	- C. A list of available net frequencies
	- D. A plan devised by a club to indicate frequency band usage
--
- [[T2A11]] (C)
What term describes an amateur station that is transmitting and receiving on the same frequency? #card
	- A. Full duplex
	- B. Diplex
	- C. Simplex
	- D. Multiplex
--
- [[T2A12]] (D)
What should you do before calling CQ?  
	- A. Listen first to be sure that no one else is using the frequency
	- B. Ask if the frequency is in use
	- C. Make sure you are authorized to use that frequency
	- D. All these choices are correct