E9G The Smith chart - [[E9G01]] (A) Which of the following can be calculated using a Smith chart? #card - [[A.]] Impedance along transmission lines - [[B.]] Radiation resistance - [[C.]] Antenna radiation pattern - [[D.]] Radio propagation - [[E9G02]] (B) What type of coordinate system is used in a Smith chart? #card - [[A.]] Voltage circles and current arcs - [[B.]] Resistance circles and reactance arcs - [[C.]] Voltage chords and current chords - [[D.]] Resistance lines and reactance chords - [[E9G03]] (C) Which of the following is often determined using a Smith chart? #card - [[A.]] Beam headings and radiation patterns - [[B.]] Satellite azimuth and elevation bearings - [[C.]] Impedance and SWR values in transmission lines - [[D.]] Point-to-point propagation reliability as a function of frequency - [[E9G04]] (C) What are the two families of circles and arcs that make up a Smith chart? #card - [[A.]] Inductance and capacitance - [[B.]] Reactance and voltage - [[C.]] Resistance and reactance - [[D.]] Voltage and impedance - [[E9G05]] (A) Which of the following is a common use for a Smith chart? #card - [[A.]] Determine the length and position of an impedance matching stub - [[B.]] Determine the impedance of a transmission line, given the physical dimensions - [[C.]] Determine the gain of an antenna given the physical and electrical parameters - [[D.]] Determine the loss/100 feet of a transmission line, given the velocity factor and conductor materials - [[E9G06]] (B) On the Smith chart shown in Figure E9-3, what is the name for the large outer circle on which the reactance arcs terminate? #card - [[A.]] Prime axis - [[B.]] Reactance axis - [[C.]] Impedance axis - [[D.]] Polar axis - [[E9G07]] (D) On the Smith chart shown in Figure E9-3, what is the only straight line shown? #card - [[A.]] The reactance axis - [[B.]] The current axis - [[C.]] The voltage axis - [[D.]] The resistance axis - [[E9G08]] (C) How is a Smith chart normalized? #card - [[A.]] Reassign the reactance axis with resistance values - [[B.]] Reassign the resistance axis with reactance values - [[C.]] Reassign the prime center’s impedance value - [[D.]] Reassign the prime center to the reactance axis - [[E9G09]] (A) What third family of circles is often added to a Smith chart during the process of designing impedance matching networks? #card - [[A.]] Constant-SWR circles - [[B.]] Transmission line length circles - [[C.]] Coaxial-length circles - [[D.]] Radiation-pattern circles - [[E9G10]] (D) What do the arcs on a Smith chart represent? #card - [[A.]] Frequency - [[B.]] SWR - [[C.]] Points with constant resistance - [[D.]] Points with constant reactance - [[E9G11]] (B) In what units are the wavelength scales on a Smith chart calibrated? #card - [[A.]] In fractions of transmission line electrical frequency - [[B.]] In fractions of transmission line electrical wavelength - [[C.]] In fractions of antenna electrical wavelength - [[D.]] In fractions of antenna electrical frequency